• support@phason.ca
  • sales@phason.ca
  • 1-204-233-1400
  • AutoFlex Connect
  • AutoFlex Connect
  • AutoFlex Connect
  • AutoFlex Connect


Your climate management solution

AutoFlex Connect brings flexibility and versatility to your fingertips. AutoFlex controls provide an intuitive touchscreen interface at the control.

Stay connect anywhere, anytime

Not at the control? No problem. AutoFlex Connect is accessible from any web-enabled device. No matter where you are, your AutoFlex Connect controls are always within reach.

Flexible, versatile, and expandable

AutoFlex Connect controls are modular, meaning you have the flexibility to choose only what you need. Choose from modules for sensor monitoring, or for relay, variable AC, or variable DC control. If your needs change, your AutoFlex can easily change.

Additional information

  • Intuitive user interface
  • Local configuration and monitoring using the 10-inch touchscreen display
  • Remote configuration and monitoring from any web-enabled device
  • Standard interchangeable modules for control of fixed and variable speed fans, heaters, inlets, and curtains
  • Easy expansion with modular design
    • Up to 14 modules for AFX-CONNECT
    • Up to 6 modules for AFXMINI-CONNECT
  • Corrosion resistant, water resistant, and fire retardant enclosure
  • Limited warranty (2 years)
  • Sixteen available zones for control and monitoring
  • Configurable reports sent at your convenience
  • Primary and secondary control modifiers, including:
    • Temperature
    • Humidity
    • Static pressure
    • Carbon dioxide(CO2)
    • Ammonia (NH3)
    • Light level
    • THI
    • Wind speed
    • Wind chill
    • Rain
Control power
85 to 264 VAC, 50/60 Hz
Alarm relay
0.4 A at 125 VAC, 2.0 A at 30 VDC, resistive load
0.2 A at 125 VAC, 1.0 A at 30 VDC, inductive load
Actuator Module (ACT-1)
15 A at 120/230 VAC, general-purpose (resistive)
1/2 HP at 120 VAC, 1 HP at 230 VAC
Relay Module (RM-2)
20 A at 120/230 VAC, general-purpose (resistive)
1 HP at 120 VAC, 2 HP at 230 VAC
Relay Module (RM-4)
15 A at 120/230 VAC, general-purpose (resistive)
1/2 HP at 120 VAC, 1 HP at 230 VAC
Variable AC Module (VAC-1)
7 A at 120/230 VAC, general-purpose (resistive)
4.9 FLA at 120/230 VAC, PSC motor
1/2 HP at 120 VAC, 1 HP at 230 VAC
800 W @ 120 VAC, 1600 W @ 230 VAC
Variable DC Module (VDC-1)
0 to 10 VDC, 2K Ω load
Actuator Module


Actuator Module

The Actuator Module has one open and one close relay for controlling actuators or curtain machines, and includes potentiometer feedback input.

Input Module


Input Module

The Input Module has connections for four sensors

Current sensing Relay Module


Relay Module with current sensing

The RM-2 Relay Module has two high-capacity, general-purpose relays. Each relay has current sensing.

Relay Module


Relay Module

The Relay Module has general-purpose power relays.

Variable AC Module


Variable AC Module

The Variable AC Module has one variable output, a temperature probe connector for use with heat mats, and a connection for a Single-Phase Slave (PSU-20).

Variable DC Module


Variable DC Module

The Variable DC Module has four 0 to 10 V DC signal outputs.

AutoFlex Slave


AutoFlex Expansion Box

The expansion box allows for an additional 14 modules.


FD-2-7 and FD-1-14


FanDRIVEs take the 0 to 10 VDC signal from the control and adjust fan speed.

2x 7 FLA model
1x 14 FLA model
Single-Phase Slave model PSU-20


Single-Phase Slave

Single-Phase Slave units increase the load capacity of the control's variable AC stage.

More information

Manual Override Box


Manual Override Box

The Manual Override Box increases the load handling capability of your control’s relays and provides an external disconnect.

More information

Temperature probes

Temperature probes


Temperature probes are available several lengths and can be extended up to 500 feet using extension cable.

More information

Relative Humidity Sensor


Relative Humidity Sensors

Relative Humidity Sensors allow you to monitor humidity up to 100 feet away.

More information

DOL16 Light Sensor


Dol Light Sensor

The DOL16 measures light intensity in two different ranges: 0 to 100 and 0 to 1000 lux.

More information

DOL114 Temperature and Humidity Sensor


Dol Temperature and Humidity Sensor

The DOL 114 is a high-precision temperature and relative humidity sensor available in 4 to 20 mA, 0 to 3 V, 0 to 5 V, and 0 to 10 V versions.

More information

DOL15 Temperature Sensor


Dol Temperature Sensor

The DOL15 is an all-purpose 1K electronic temperature sensor.

More information

DOL53 Ammonia Sensor


Dol Ammonia Sensor

The DOL 53 is designed for stationery, continuous monitoring of ammonia (NH3) in livestock and industrial facilities.

More information

DOL58 Weather Sensor


Dol Weather Sensor

The DOL 58 is an ultrasonic sensor that measures wind speed and direction. There is a connection for optional air pressure or temperature.

More information

DOL19 Carbon Dioxide


Dol Carbon Dioxide

The DOL 19 measures carbon dioxide (CO2) in a range that has been selected to care for animal comfort and monitor error conditions.

More information

  • Communication controller
    Communication controller

    Model: KAFXC-COM

  • AutoFlex Connect Mini display kit
    AutoFlex Connect Mini
    display kit


  • AutoFlex Connect power supply
    AutoFlex Connect
    power supply

    Model: KAFX-POWER

  • AutoFlex Connect mounting board
    AutoFlex Connect
    mounting board


  • Display controller
    Display controller


  • AutoFlex display kit
    AutoFlex Connect
    display kit


  • AutoFlex Connect Mini power supply
    AutoFlex Connect Mini
    power supply

    Model: KAFXM-POWER

  • AutoFlex Connect Mini power supply
    AutoFlex Connect Mini
    mounting board