Evaporative Cooling Control (ECC-1)

Automatically controls sprinkler solenoids, water pumps, and fans for direct or indirect evaporative cooling systems

Phason's ECC-1 Evaporative Cooling Control monitors temperatures and efficiently and effectively controls evaporative cooling cycles according to your programmed settings.

Designed with versatility and usability in mind, the ECC-1 has two main modes of operation: 'Soaker Mode' for direct evaporative cooling or 'Mister/Fogger Mode' for indirect cooling. The ECC-1 has six relays, which can be programmed to control a combination of sprinkler solenoids, pumps, and/or single-speed fans.

With the ECC-1's active time settings, you can program sprinkling to occur only during a certain time of day. With an optional humidity sensor, you can program the ECC-1 to bypass the soaking or misting portion of the cycle when humidity levels are too high.

ECC-1 Evaporative Cooling Control

The LCD displays status and setting information and the four-button keypad allows you to easily scroll through information and program the control. The ECC-1's real-time clock and power-failure memory retention help save your settings and status during a power failure.

The ECC-1 is ideal for many applications, including dairy, swine, poultry, and greenhouse. All this from one powerful, efficient, and easy-to-use control!

For more information about how the ECC-1 operates, click on the ECC-1 feature sheet below.

Features

Electrical ratings

Input:
Input fuse:
Relays 1- 6:



Alarm relay:
120/230 VAC, 50/60 Hz
10 A, 250 VAC ABC-type ceramic
10 A at 120/230 VAC, general-purpose (resistive)
1/3 HP at 120 VAC, 1/2 HP at 230 VAC
360 W tungsten at 120 VAC
250 VA at 120 VAC for pilot-duty use
0.4 A at 125 VAC; 2 A at 30 VDC, resistive load
0.2 A at 125 VAC; 1 A at 30 VDC, inductive load

Additional information

© 2002 to 2010 Phason Inc. All rights reserved Last modified: