PEC Plus eight-stage control (PEC-PLUS)
The ultimate room control
The PEC Plus is designed to control ventilation equipment for a single room. The control automatically monitors and controls the temperature by operating ventilation equipment such as fans, heaters, inlet actuators, curtain machines, or other equipment according to your programmed settings.
The display shows the ambient temperature and any alarm messages. During normal operation, the status LEDs show when the stages are on. When in programming mode, the LEDs indicate which stage you are programming.
The easy-to-use keypad and menu system make the PEC Plus one of the easiest controls to program. The PEC Plus' advanced and powerful features are never more than a few keystrokes away.
The seven-step growth curve is a powerful feature that allows you to program the control to automatically adjust the temperature set points over time to control the temperature in a room or zone. This is an ideal feature to use as your animals grow and their temperature requirements change.
The PEC Plus is ideal for poultry, livestock, greenhouse, or light-industrial buildings and is compatible with most ventilation strategies: natural, forced, tunnel, and chimney ventilation.
Features
- Two variable stages for controlling fans
- Six relay stages (heat, cool, duty cycle, curtain, or actuator control)
- One alarm relay (for external alarm siren or alarm system)
- Temperature monitoring and control, with up to four-probe averaging
- Adjustable temperature settings
- Configurable seven-step growth curve
- Customizable alarm settings
- Three-second full-power-turn-on for minimizing fan ice-up
- Daily high and low temperature display
- Power-failure memory protection
- PIN security
- Four-character LED display and individual stage LEDs
- On-board diagnostics and self tests
- Thirty-foot temperature probe, extendable to 500 feet (additional probes available)
- Rugged enclosure (corrosion resistant, water resistant, and fire retardant)
- CSA approval
- Two-year limited warranty
Electrical ratings
| Input: Variable stage: Variable stage fuse: Relay stage: Alarm relay: |
120/230 VAC, 50/60 Hz 10 A at 120/230 VAC, general-purpose (resistive) 7 FLA at 120/230 VAC, PSC motor 1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor 15 A, 250 VAC ABC-type ceramic 10 A at 120/230 VAC, general-purpose (resistive) 1/3 HP at 120 VAC, 1/2 HP at 230 VAC 360 W tungsten at 120 VAC 0.4 A at 125 VAC; 2 A at 30 VDC, resistive load 0.2 A at 125 VAC; 1 A at 30 VDC, inductive load |
Available options
- PEC+ Saver—stores a complete copy of all a PEC Plus' configuration and settings. You can restore the configuration and settings any time, or even use them to program new PEC Plus controls in seconds!
- PEC+ Updater—allows you to upgrade your PEC Plus's firmware. The PEC+ Updater takes only seconds to use and can upgrade all the PEC Plus controls at your site.
- Temperature probes and extension cable—Automatic four-zone temperature averaging and outdoor temperature monitoring are available with additional temperature probes. Probes are available in 1, 6, 30, 75, or 150-foot cable lengths and can extended up to 500 feet using extension cable.
Additional information
- PEC Plus user manual (PDF - 1145K)
- OLD PEC Plus user manual (PDF - 688K)
- PEC Plus feature sheet (PDF - 129K)
- Service bulletin 11 - Chimney ventilation (PDF - 888K)
- Service bulletin 27 - PEC Plus firmware version 1.02 (PDF - 288K)
- PEC Plus retrofit guide (PDF - 34K)
- Ventilation control overview (PDF - 35K)
| © 2002 to 2010 Phason Inc. All rights reserved | Last modified: |